Size |
N/A 1 in |
Dimension D1 |
N/A 1.00 in |
Dimension D2 |
N/A 3.13 in |
Dimension D3 |
N/A 4.25 in |
Dimension e |
N/A 0.63 in |
Number of Holes (n) |
N/A 4 |
Dimension D4 |
N/A 4.34 in |
Dimension D5 |
N/A 5.13 in |
Dimension D6 |
N/A 2.97 in |
Dimension L |
N/A 6.31 in |
Dimension T |
N/A 0.59 in |
Dimension A |
N/A 0.25 in |
Dimension h |
N/A 1.56 in |
Dimension H |
N/A 4.72 in |
Working Pressure (Elastomer) |
N/A 150 psi |
Working Pressure (Tetrafluoroethylene (TFE)) |
N/A 100 psi |
| Materials of Construction1 |
N/A
Part - Body Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Bonnet Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Disc Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Sheet Gasket Holder Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Swing Arm Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Disc Gasket Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® Tetrafluoroetheylene (TFE) Part - Bonnet Gasket Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® Part - Shaft Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Washer Pcs - 1" - 3" (6 sets) and 4" - 8" (8 sets) Material - SUS304 Stainless Steel Part - Bolts Pcs - 1" - 3" (6 sets) and 4" - 8" (8 sets) Material - SUS304 Stainless Steel Part - Nuts Pcs - 1" - 3" (6 sets) and 4" - 8" (8 sets) Material - SUS304 Stainless Steel Part - Disc Holder Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - O-ring Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® Part - Shaft Holder Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Set Bolts Pcs - 1" - 2" (1) and 2-1/2" - 4" (3) Material - Polyvinyl Chloride (PVC) and Polypropylene (PP) Pcs - 5" - 6" (4) and 8" (8) Material - Polypropylene Glycols (PPG) and Polyvinylidene Fluoride (PVDF) Part - Set Pin Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), and Polypropylene Glycols (PPG), and 316 stainless Steel Part - Bracket Pcs - 1 Material - 316 Stainless Steel Part - Nut Pcs - 1 Material - 316 Stainless Steel Part - Adjustment Stem Pcs - 1 Material - 316 Stainless Steel Part - Spring Pcs - 1 Material - 316 Stainless Steel Part - Lever (Rod Eye) Pcs - 1 Material - Plated Carbon Steel Part - Pin Pcs - 1 Material - 316 Stainless Steel |
Body/Bonnet |
N/A
Polyvinyl Chloride (PVC), ASTM D-1784 Polypropylene (PP), ASTM D-4101 Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Disc Assembly/Shaft |
N/A
Polyvinyl Chloride (PVC), ASTM D-1784 Polypropylene (PP), ASTM D-4101 Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Seal/Seat |
N/A
Ethylene Propylene Diene monomer (EPDM) Fluorocarbon, Viton® (Dupont Dow Elastomers) Fluorel (3M Corp.) Polytetrafluoroethylene (PTFE) (Dupont Dow Elastomers) |
External Fasteners |
N/A 304 Stainless Steel |
Testing Procedure |
N/A Testing performed on Polyvinyl Chloride (PVC) material at 73 ºF water temperature, non-shock. |
Additional Information |
N/A Valves are of low pressure drop design. Body has a full open disc stop to prevent over travel and insure proper closing action. Bonnet is fully gasketed and fastened using stainless steel hardware. Valves are top entry design for ease of maintenance. Valves are suitable for vertical and horizontal installation. Flanged ends are designed for installation between ANSI B16.5 Class 150 flanges. |
