Brands |
N/A TVI |
Actuator Type |
N/A Lever |
Type |
N/A Wafer |
Flow Coefficient Value (Cv) |
N/A 2065 |
Torque |
N/A 850 lb·in |
Working Pressure |
N/A 150 psi |
Nominal Size |
N/A 8 in200 mm |
Dimension D1 |
N/A 7.87 in |
Dimension D2 |
N/A 11.70 in |
Dimension D3 |
N/A 13.54 in |
Dimension D4 |
N/A 4.31 in |
Dimension n |
N/A 8 in |
Dimension L1 |
N/A 7.52 in |
Dimension L2 |
N/A 2.40 in |
Dimension L3 |
N/A 2.52 in |
Dimension H1 |
N/A 15.12 in |
Dimension H2 |
N/A 10.12 in |
Dimension H3 |
N/A 6.77 in |
Dimension H4 |
N/A 2.21 in |
Dimension H5 |
N/A 3.39 in |
Dimension H6 |
N/A 1.0 in |
Dimension I |
N/A 18.50 in |
Dimension K |
N/A 11.69 in |
| Materials of Construction1 |
N/A
Part - Body Pcs - 1 Material - Polyvinyl Chloride (PVC),Polypropylene (PP), Polyvinylidene Fluoride (PVDF), and Chlorinated Polyvinyl Chloride (CPVC) Part - Disc Pcs - 1 Material - Polyvinyl Chloride (PVC),Polypropylene (PP), Polyvinylidene Fluoride (PVDF), and Chlorinated Polyvinyl Chloride (CPVC) Part - Seat Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® and BUNA N Part - Stem Pcs - 1 Material - SUS 410, SUS 316 Part - Stem O-ring Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® and BUNA N Part - Washer Pcs - 1 Material - SUS 304 Part - Positioner Pcs - 1 Material - SUS 304 Part - Screw Pcs - 3 Material - SUS 304 Part - Indicator Pcs - 1 Material - SUS 304 Part - Handle Pcs - 1 Material - Acrylonitrile Butadiene Styrene (ABS) Part - Lever Pcs - 1 Material - Acrylonitrile Butadiene Styrene (ABS) Part - Lever Pcs - 1 Material - SUS 410 Part - Spring Pcs - 1 Material - SUS 410 Part - Setpin (Long) Pcs - 1 Material - SUS 410 Part - Setpin (Short) Pcs - 1 Material - SUS 410 Part - Handle Cap Pcs - 1 Material - Acrylonitrile Butadiene Styrene (ABS) Part - Stem Bolt Pcs - 1 Material - Polyvinyl Chloride (PVC),Polypropylene (PP), Polyvinylidene Fluoride (PVDF), and Chlorinated Polyvinyl Chloride (CPVC) Part - Cap Pcs - 1 Material - Polyvinyl Chloride (PVC) Coated Brass Part - Handle Insert Pcs - 1 Material - Casting Parts Part - Bolt Pcs - 1 Material - Brass, SUS 304 Part - Bolt Pcs - 1 Material - SUS 304 |
Body |
N/A
Polyvinyl Chloride (PVC), ASTM D-1784 (Standard). Polypropylene (PP) and Polyvinylidene Fluoride (PVDF) Available Polypropylene (PP), ASTM D-4101. Polyvinylidene Fluoride (PVDF) Available Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Disc |
N/A
Polypropylene (PP), ASTM D-4101 (Standard) Polyvinylidene Fluoride (PVDF) Available Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Shaft |
N/A ASTM A-240, TYPE 410 Stainless Steel (Standard), 304, 316 Stainless Steel available |
Seal/Seat |
N/A
Ethylene Propylene Diene Monomer (EPDM) Fluorocarbon, Viton® (Dupont Dow Elastomers) Nitrile (Butadiene) Rubber (BUNA N) |
Hardware |
N/A 2" - 8" 304 Stainless Steel |
Lever |
N/A Acrylonitrile Butadiene Styrene (ABS), ASTM D-1788 |
Gear Box |
N/A Cast Iron Housing ASTM A-53, Epoxy Coated |
Testing Procedure |
N/A
Every valve is tested for bubble tight shutoff prior to leaving the factory. Pressure testing preformed on Polyvinyl Chloride (PVC)/Ethylene Propylene Diene Monomer (EPDM) valves at 73 ºF water temperature, non-shock. |
Additional Information |
N/A 8" valves shall be either spring lever or gear actuated as required or specified. Seat liners shall be full faced with integral, ribbed flanges. No auxiliary gaskets shall be required for installation. Seat liners shall effectively isolate the body and shaft from the flow media. Seat liners shall also thermally insulate the body from the internal operating temperature. Valve liner and seals are replaceable. |
