Brands |
N/A TVI |
Type |
N/A Wafer |
Weight Per Valve |
N/A 14 lb |
Flow Coefficient Value (Cv) |
N/A 1200 |
Torque1 | N/A 435 in·lb |
Size |
N/A 6 in |
Dimension D1 |
N/A 6.02 in |
Dimension D2 |
N/A 9.50 in |
Dimension D3 |
N/A 11.42 in |
Dimension e |
N/A 0.87 in |
Dimension n |
N/A 8 in |
Dimension L |
N/A 2.44 in |
Dimension L1 |
N/A 2.80 in |
Dimension H1 |
N/A 5.71 in |
Dimension H2 |
N/A 6.97 in |
Dimension H3 |
N/A 3.78 in |
Dimension I |
N/A 16.46 in |
Dimension K |
N/A 12.20 in |
Body Test Pressure |
N/A 222 psi |
Seat Test Pressure |
N/A 177 psi |
Working Pressure |
N/A 150 psi |
Materials of Construction2 |
N/A
Part - Body Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polyvinylidene Fluoride (PVDF), Chlorinated Polyvinyl Chloride (CPVC) (Available to 14") Part - Disc Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Polyvinylidene Fluoride (PVDF), Chlorinated Polyvinyl Chloride (CPVC) (Available to 14") Part - Stem Pcs - 1 Material - SUS410, SUS304, and SUS316 Stainless Steel Part - Stem O’Ring Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM), Viton®, and Nitrile (Butadiene) Rubber (BUNA N) Part - Washer Pcs - 1 Material - SUS304 Stainless Steel Part - Seat Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton®, and Nitrile (Butadiene) Rubber (BUNA N) Part - Disc O’Ring Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM), Viton®, and Nitrile (Butadiene) Rubber (BUNA N) Part - Disc O’Ring Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM), Viton®, and Nitrile (Butadiene) Rubber (BUNA N) Part - Stem Retainer Pcs - 1 Material - SUS304 Stainless Steel Part - Retainer Cap Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF), Part - Positioner Pcs - 1 Material - SUS304, 8" Use SS41 Stainless Steel Part - Screw Pcs - 3 Material - SUS304 Stainless Steel Part - Handle Pcs - 1 Material - ABS Part - Inserted Metal of Handle Pcs - 1 Material - CS Part - Nut Pcs - 1 Material - Polyvinyl Chloride (PVC) Coated Brass, and SUS304 Stainless Steel Part - Hand Lever Pcs - 1 Material - SUS 304, and SUS41 Stainless Steel Part - Spring Pcs - 1 Material - SUS304 Stainless Steel Part - Set Pin Pcs - 1 Material - Brass |
Body |
N/A
Polyvinyl Chloride (PVC), Chlorinated Polyvinyl Chloride (CPVC) (Available to 12"), ASTM D-1784 Polypropylene (PP), ASTM D-4101 Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Disc |
N/A
Polypropylene (PP), ASTM D-4101 (Standard 2" - 24" in PVC & PP valves) Polyvinyl Chloride (PVC), Chlorinated Polyvinyl Chloride (CPVC), ASTM D - 1784 (CPVC disc standard in CPVC valves) Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Shaft |
N/A ASTM A-240, TYPE 410 Stainless Steel (Standard) 304 Stainless Steel, 316 Stainless Steel, and Titanium available |
Seal/Seat |
N/A
Ethylene Propylene Diene Monomer (EPDM) Fluorocarbon, Viton® (Dupont Dow Elastomers) Nitrile (Butadiene) Rubber (BUNA N) |
Hardware |
N/A 2" Thru 24" 304 Stainless Steel 8 size positioner plate 410 Stainless Steel Chrome Plated |
Lever |
N/A Acrylonitrile Butadiene Styrene (ABS), ASTM D-1788 |
Gear Box |
N/A Cast Iron Housing ASTM A-53, Epoxy Coated |
Testing Procedure |
N/A Every valve is tested for bubble tight shutoff prior to leaving the factory. Pressure testing preformed on Polyvinyl Chloride (PVC)/Ethylene Propylene Diene Monomer (EPDM) valves at 73 ºF water temperature, non-shock. |
Additional Information |
N/A 10"-24" valves shall have epoxy coated gear actuators with handwheel. 8" valves shall be either spring lever or gear actuated as required or specified. Seat liners shall be full faced with integral, ribbed flanges. No auxiliary gaskets shall be required for installation. Seat liners shall effectively isolate the body and shaft from the flow media. Seat liners shall also thermally insulate the body from the internal operating temperature. Valve liner and seals are replaceable. |