Nominal Size |
N/A 900 mm36 in |
Dimension D1 |
N/A 34.25 in |
Dimension D2 |
N/A 42.75 in |
Dimension D3 |
N/A 46.38 in |
Dimension n |
N/A 32 in |
Dimension e |
N/A 1.62 in |
Dimension H1 |
N/A 24.57 in |
Dimension H2 |
N/A 27.32 in |
Dimension H3 |
N/A 5.59 in |
Dimension K |
N/A 14.58 in |
Dimension D4 |
N/A 16 in |
Dimension L |
N/A 9.21 in |
Dimension L1 |
N/A 9.64 in |
Test Pressure |
N/A 100 psi |
Working Pressure |
N/A 75 psi |
Materials of Construction |
N/A
Part - Body Pcs - 1 Material - Polypropylene (PP) Part - Seat Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® and Nitrile Rubber (NBR) Part - Disc Pcs - 1 Material - Unplasticized Polyvinyl Chloride (UPCV), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), Polypropylene Glycols (PPG), and Polyvinylidene Fluoride (PVDF) Part - Disc O-Ring (A) Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® and Nitrile Rubber (NBR) Part - Disc O-Ring (B) Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® and Nitrile Rubber (NBR) Part - Stem Pcs - 1 Material - SUS 410 Stainless Steel Part - Stem O-Ring Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® and Nitrile Rubber (NBR) Part - Gear Box Pcs - 1 Material - Cast Iron Part - Gear Box Cap Pcs - 1 Material - Cast Iron Part - Side Cap Pcs - 1 Material - Cast Iron Part - Indicator Plate Pcs - 1 Material - Cast Iron Part - Gear Pcs - 1 Material - Ductile Iron Part - Oil Seal Pcs - 1 Material - Paper Part - Bearing Pcs - 1 Material - Steel Part - Adjustable Bolt Pcs - 2 Material - Steel Part - Worm Shaft Pcs - 1 Material - Steel Part - Set Pin Pcs - 1 Material - K7 Part - Hand Wheel Pcs - 1 Material - Cast Iron Part - Tightening Bolt Pcs - 4 Material - SUS304 Stainless Steel Part - Bearing Pcs - 4 Material - Copper Part - Spur Gear Body Pcs - 1 Material - Cast Iron Part - Spur Gear Body Pcs - 1 Material - Steel Part - Spur Gear Shaft Pcs - 1 Material - Steel Part - Spur Gear Cover Pcs - 1 Material - Cast Iron Part - Bolt Pcs - 6 Material - Steel |
Body |
N/A Glass Reinforced Polypropylene (PPG) |
Disc |
N/A
Polypropylene (PP), Glass Reinforced Polypropylene (PPG) ASTM D - 4101 (PPG - Standard Disc) Polyvinyl Chloride (PVC), ASTM D-1784 Chlorinated Polyvinyl Chloride (CPVC), ASTM D-1784 (CPVC disc Standard in CPVC Valves) Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Shaft |
N/A ASTM A-240, TYPE 410 Stainless Steel (Standard) 304 Stainless Steel, and 316 Stainless Steel |
Seal/Seat |
N/A
Ethylene Propylene Diene Monomer (EPDM) Nitrile (Butadiene) Rubber (BUNA N) Fluorocarbon, Viton® (Dupont Dow Elastomers) Available in the near future Hypalon - Available in the near future |
Gear Box |
N/A Cast Iron Housing ASTM A-53, Epoxy Coated |
Testing Procedure |
N/A Every valve is tested for bubble tight shutoff. Testing performed on Polyvinyl Chloride (PVC)/Polypropylene (PP)/Ethylene Propylene Diene Monomer (EPDM) valves at 73 ºF water temperature, non-shock. |
Additional Information |
N/A Seat liner shall be full faced with integral, ribbed flanges. No auxiliary gaskets shall be required for installation. Seat liners shall effectively isolate the body & shaft from the flow media. Seat liners shall also thermally insulate the body from the internal operating temperature. Valve Liner and seals are replaceable. |
