Thermoplastic Valves, Inc.
Thermoplastic Valves, Inc.
53 South 7th St.
Emmaus, PA 18049
United States of America
Phone: 610-967-6388
Fax: 610-967-6448
Toll-free: 866-242-5890
Email: tvi2@fast.net
Website: http://www.tvivalves.com
Print Back
Thermoplastic compact ball valve (6") shall have a one piece PVC molded body with socket or threaded end connections. Valve is full port for lowest possible pressure loss. Seat shall be comprised of Polytetrafluoroethylene (PTFE) and seal of EPDM. Every valve is fully pressure and cycle tested to insure quality. Valve shall have a one piece self centering ball and stem design for leak tight operation.
Unit of Measure

Specifications

Brands

 N/A TVI

Flow Coefficient Value (Cv)

 N/A 1390

Body/Ball/Stem

 N/A Polyvinyl Chloride (PVC), ASTM D-1784

ANSI Dimensions

Size

 N/A 6 in

Dimension D1

 N/A 5.9 in

Socket Dimension d

 N/A 6.65 in

Thread Dimension d

 N/A 5.9 in

Dimension P

 N/A 3.03 in

Dimension L

 N/A 14.04 in

Dimension K

 N/A 14.23 in

Dimension H

 N/A 8.15 in

Test Pressure

 N/A 225 psi

Working Pressure

 N/A 150 psi

Material of Construction

Materials of Construction

 N/A Part - Body
Pcs - 1
Material - Unplasticized Polyvinyl Chloride (UPVC)

Part - Ball
Pcs - 1
Material - Unplasticized Polyvinyl Chloride (UPVC)

Part - Seat Carrier
Pcs - 1
Material - Unplasticized Polyvinyl Chloride (UPVC)

Part - Stem
Pcs - 1
Material - Unplasticized Polyvinyl Chloride (UPVC)

Part - End Connector
Pcs - 1
Material - Unplasticized Polyvinyl Chloride (UPVC)

Part - Seat Carrier O-ring
Pcs - 1
Material - Ethylene Propylene Diene Monomer (EPDM)

Part - Stem O-ring
Pcs - 2
Material - Ethylene Propylene Diene Monomer (EPDM)

Part - Body O-ring
Pcs - 2
Material - Ethylene Propylene Diene Monomer (EPDM)

Part - Seat
Pcs - 2
Material -Polytetrafluoroethylene (PTFE)

Part - Activities Jumper
Pcs - 1
Material - Unplasticized Polyvinyl Chloride (UPVC)

Part - Handle Lever
Pcs - 1
Material - Polypropylene (PP)

Part - Handle
Pcs - 1
Material - Polypropylene (PP)

Part - Jumper
Pcs - 1
Material - Polypropylene (PP)

Part - Washer
Pcs - 1
Material - Polypropylene (PP)

Part - Bolt
Pcs - 1
Material - SUS Stainless Steel

Part - Cap
Pcs - 1
Material - Polypropylene (PP)

Construction

Seat

 N/A Polytetrafluoroethylene (PTFE), Dupont Dow Elastomers

Seals (O-Rings)

 N/A Ethylene Propylene Diene Monomer (EPDM)

Manual Lever

 N/A Acrylonitrile Butadiene Styrene (ABS), ASTM D-1788

Socket

 N/A ASTM-D-2467 (Polyvinyl Chloride (PVC), SCH-80)

Threaded

 N/A ASTM-D-2467 (Polyvinyl Chloride (PVC), SCH-80)

Design Advantages

Design Advantages

 N/A Economically priced
Light weight & maintenance-free makes for an easy installation
Durable construction, low torque with self lubricating Polytetrafluoroethylene (PTFE) seat
Body Construction - light Weight, chemical resistant, non-corrosive

Applications

Applications

 N/A Water and Waste Treatment
Chemical Industry
Environmental Industry
Process Industry
Systems Engineering

Testing Procedure

Testing Procedure

 N/A Every valve is tested for bubble tight shutoff prior to leaving the factory.
Pressure testing preformed on Polyvinyl Chloride (PVC)/Ethylene Propylene Diene Monomer (EPDM) valves at 73 ºF water temperature, non-shock.