Brands |
N/A TVI |
Port Connections |
N/A True Union |
Flow Coefficient Value (Cv) |
N/A 330 |
Torque |
N/A 145 lb·in100 psi |
Size |
N/A 2-1/2 in |
Dimension D1 |
N/A 2.64 in |
Dimension D2 |
N/A 5.500 in |
Dimension D3 |
N/A 7.000 in |
Socket Dimension d |
N/A 2.889 in |
Thread Dimension d |
N/A 2-1/2 in |
Thread Type (Dimension d) |
N/A National Pipe Thread |
Dimension e |
N/A 0.750 in |
Dimension n |
N/A 4 in |
Dimension P |
N/A 1.750 in |
Socket Dimension L |
N/A 8.860 in |
Thread Dimension L |
N/A 8.860 in |
Flange Dimension |
N/A 11.540 in |
Dimension A |
N/A 7.480 in |
Dimension T |
N/A 0.787 in |
Dimension H |
N/A 5.51 in |
Dimension B |
N/A 5.91 in |
Working Pressure |
N/A 235 psi |
| Materials of Construction1 |
N/A
Part - Stem Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF) Part - Ball Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF) Part - Body Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF) Part - Seat Carrier Pcs - 1 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF) Part - Union Nut Pcs - 2 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF) Part - Handle Pcs - 1 Material - Acrylonitrile Butadiene Styrene (ABS) Part - End Connector Pcs - 2 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF) Part - Seat Pcs - 2 Material - Polytetrafluoroethylene (PTFE) Part - Stem O-Ring Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® Part - Seat Carrier O-Ring Pcs - T Material - Ethylene Propylene Diene Monomer (EPDM), Viton® Part - Body O-Ring Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® Part - Solid End O-Ring- Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM), Viton® Part - Flange Pcs - 2 Material - Polyvinyl Chloride (PVC), Polypropylene (PP), Chlorinated Polyvinyl Chloride (CPVC), and Polyvinylidene Fluoride (PVDF) |
Body/Ball/Stem/End Nuts and Connectors |
N/A
Polyvinyl Chloride (PVC), Chlorinated Polyvinyl Chloride (CPVC), ASTM D-1784 Polypropylene (PP), ASTM D-4101 Polyvinylidene Fluoride (PVDF), ASTM D-3222 |
Seat |
N/A Polytetrafluoroethylene (PTFE) (Dupont Dow Elastomers) |
Seals |
N/A
Ethylene Propylene Diene Monomer (EPDM) Fluorocarbon. Viton® (DuPont Dow Elastomers) Fluorel (3M Corp.) |
Manual Lever |
N/A Acrylonitrile Butadiene Styrene (ABS), ASTM D-1788 |
Socket |
N/A
ASTM - D-2467 (Polyvinyl Chloride (PVC), SCH-80) ASTM, F-439 (Chlorinated Polyvinyl Chloride (CPVC), SCH-80) |
Threaded |
N/A
ASTM - D-2464 (Polyvinyl Chloride (PVC), SCH-80) ASTM, F-437 (Chlorinated Polyvinyl Chloride (CPVC), SCH-80) |
Flanged |
N/A ANSI - B16.5 Class 150 |
Testing Procedure |
N/A Testing performed on Polyvinyl Chloride (PVC) material at 73 ºF water temperature, non-shock. |
Additional Information |
N/A Valve has full port for lowest possible pressure loss. Seats shall be easily adjustable and replaceable. Stem has an internal pressure sealed land to protect stem and stem seal from contaminants. Every valve is fully pressure and cycle tested before leaving the factory. |
Note |
N/A
Both socket and threaded end connectors shall be supplied on all 1/2" - 2" Polyvinyl Chloride (PVC) and Chlorinated Polyvinyl Chloride (CPVC) valves. On 2 1/2" - 4" socket end connectors will be supplied unless otherwise specified. Valves shall be backed by a full two (2) year guarantee. Not recommended for compressed air or gas service. |
