TVI Valves
Custom Valve Solutions
Thermoplastic Ball Valves 1/2" - 4" are designed to safely block full system pressure in either direction to allow on-line system maintenance. Valve stem is of the blow-out proof design. Valve has full port for lowest possible pressure loss. Seats shall be easily adjustable and replaceable. Stem has an internal pressure sealed land to protect stem and stem seal from contaminants. Every valve is fully pressure and cycle tested before leaving the factory.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Size

Dimension D1

Dimension D2

Working Pressure

N/A 1/2 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 1/2 in N/A 0.591 in N/A 2.375 in N/A 235 psi
N/A 3/4 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 3/4 in N/A 0.799 in N/A 2.750 in N/A 235 psi
N/A 1 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 1 in N/A 1.024 in N/A 3.125 in N/A 235 psi
N/A 1-1/4 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 1-1/4 in N/A 1.20 in N/A 3.500 in N/A 235 psi
N/A 1-1/2 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 1-1/2 in N/A 1.50 in N/A 3.875 in N/A 235 psi
N/A 2 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 2 in N/A 1.89 in N/A 4.750 in N/A 235 psi
N/A 2-1/2 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 2-1/2 in N/A 2.64 in N/A 5.500 in N/A 235 psi
N/A 3 Inch (in) True Union Type Safety Block Ball Valve with Mounting Pads N/A 3 in N/A 3.150 in N/A 6.000 in N/A 235 psi
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1