Request Our New Price Sheet [Updated April 1 2021]

TVI Valves
Request Information
Ball Check Valves (6") are of all thermoplastic construction, 10" bodies are fiberglass. The Body has full length ribs for maximum flow, minimum pressure drop, and to eliminate ball sticking and chatter. Ball is of solid thermoplastic material. In 6" size. In 10" size screen is PVDF.
Unit of Measure

Specifications

Brands

 N/A TVI

Flow Coefficient Value (Cv)

 N/A 1215

ANSI Dimensions

Size

 N/A 6 in

Dimension D1

 N/A 5.91 in

Dimension D2

 N/A 9.49 in

Dimension D3

 N/A 11.10 in

Dimension n

 N/A 8 in

Dimension e

 N/A 0.87 in

Dimension L

 N/A 30.94 in

Dimension T

 N/A 0.91 in

Dimension D4

 N/A 9.37 in

Dimension D5

 N/A 14.37 in

Dimension D6

 N/A 6.59 in

Dimension L1

 N/A 18.70 in

Working Pressure

 N/A 85 psi

Material of Construction

Materials of Construction1 N/A Part - Flange End
Pcs - 1
Material - 6" Polyvinyl Chloride (PVC) (10"-PPG)

Part - Seal
Pcs - 1
Material - Ethylene Propylene Diene Monomer (EPDM), Viton®

Part - Ball (6") screen (10")
Pcs - 1
Material - 6" Polyvinyl Chloride (PVC) (10"-Polyvinylidene Fluoride (PVDF))

Part - Body
Pcs - 1
Material - 6" Polyvinyl Chloride (PVC) (10"-FRP)

Part - Hardware
Pcs - 1
Material - 304 Stainless Steel

Part - Foot Valve Assembly
Material - Polyvinyl Chloride (PVC)

Construction

Body/Union Nut/End Connectors

 N/A Polyvinyl Chloride (PVC), ASTM D-1784
Polypropylene (PP), ASTM D-4101
Polyvinylidene Fluoride (PVDF), ASTM D-3222
Fiber Reinforced Plastic (FRP), ASTM

Ball/Screen

 N/A Polyvinyl Chloride (PVC), ASTM D-1784
Polypropylene (PP), ASTM D-4101
Polyvinylidene Fluoride (PVDF), ASTM D-3222

Seal/Seat

 N/A Ethylene Propylene Diene Monomer (EPDM)
Fluorocarbon, Viton® (Dupont Dow Elastomers)
Fluorel (3M Corp.)

Flanged Only

 N/A ANSI - B16.5 Class 150

Additional Information

Additional Information

 N/A Seat is full circle and resilient. A molded gasket seal and seat enlarges seating surface and facilitates maintenance. Valves require less than one (1) psi to open and 3-5 psi to close drop tight. Valves are capable of installation in either vertical or horizontal pipe run. Valves become foot valves by attaching a screen assembly.

Note

Note

 N/A Not recommended for compressed air or gas service.
  • 1 Viton® is a trademark of DuPont Performance Elastomer.