Thermoplastic compact ball valve (6") shall have a one piece PVC molded body with socket or threaded end connections. Valve is full port for lowest possible pressure loss. Seat shall be comprised of Polytetrafluoroethylene (PTFE) and seal of EPDM. Every valve is fully pressure and cycle tested to insure quality. Valve shall have a one piece self centering ball and stem design for leak tight operation.
Unit of Measure
Specifications
|
ANSI Dimensions
|
Material of Construction
|
Construction
|
Design Advantages
|
Applications
|
Testing Procedure
Specifications
Brands |
N/A TVI |
Flow Coefficient Value (Cv) |
N/A 1390 |
Body/Ball/Stem |
N/A Polyvinyl Chloride (PVC), ASTM D-1784 |
ANSI Dimensions
Size |
N/A 6 in |
Dimension D1 |
N/A 5.9 in |
Socket Dimension d |
N/A 6.65 in |
Thread Dimension d |
N/A 5.9 in |
Dimension P |
N/A 3.03 in |
Dimension L |
N/A 14.04 in |
Dimension K |
N/A 14.23 in |
Dimension H |
N/A 8.15 in |
Test Pressure |
N/A 225 psi |
Working Pressure |
N/A 150 psi |
Material of Construction
Materials of Construction |
N/A
Part - Body Pcs - 1 Material - Unplasticized Polyvinyl Chloride (UPVC) Part - Ball Pcs - 1 Material - Unplasticized Polyvinyl Chloride (UPVC) Part - Seat Carrier Pcs - 1 Material - Unplasticized Polyvinyl Chloride (UPVC) Part - Stem Pcs - 1 Material - Unplasticized Polyvinyl Chloride (UPVC) Part - End Connector Pcs - 1 Material - Unplasticized Polyvinyl Chloride (UPVC) Part - Seat Carrier O-ring Pcs - 1 Material - Ethylene Propylene Diene Monomer (EPDM) Part - Stem O-ring Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM) Part - Body O-ring Pcs - 2 Material - Ethylene Propylene Diene Monomer (EPDM) Part - Seat Pcs - 2 Material -Polytetrafluoroethylene (PTFE) Part - Activities Jumper Pcs - 1 Material - Unplasticized Polyvinyl Chloride (UPVC) Part - Handle Lever Pcs - 1 Material - Polypropylene (PP) Part - Handle Pcs - 1 Material - Polypropylene (PP) Part - Jumper Pcs - 1 Material - Polypropylene (PP) Part - Washer Pcs - 1 Material - Polypropylene (PP) Part - Bolt Pcs - 1 Material - SUS Stainless Steel Part - Cap Pcs - 1 Material - Polypropylene (PP) |
Construction
Seat |
N/A Polytetrafluoroethylene (PTFE), Dupont Dow Elastomers |
Seals (O-Rings) |
N/A Ethylene Propylene Diene Monomer (EPDM) |
Manual Lever |
N/A Acrylonitrile Butadiene Styrene (ABS), ASTM D-1788 |
Socket |
N/A ASTM-D-2467 (Polyvinyl Chloride (PVC), SCH-80) |
Threaded |
N/A ASTM-D-2467 (Polyvinyl Chloride (PVC), SCH-80) |
Design Advantages
Design Advantages |
N/A
Economically priced Light weight & maintenance-free makes for an easy installation Durable construction, low torque with self lubricating Polytetrafluoroethylene (PTFE) seat Body Construction - light Weight, chemical resistant, non-corrosive |
